Our new tool called Dot Perfect has finally arrived in the studio!
If you've ever been frustrated putting dot's around the circumference of your bead and they aren't coming out evenly spaced no matter what you've tried, try Dot Perfect.
Dot perfect is a simple little guide that slips onto your mandrel while you're working and slips back off before the bead goes into the kiln. Constructed of a solid brass machined body and stainless steel prongs these tools are designed for a lifetime of use.
The Dot Perfect guides are available to fit onto your 1/16" mandrels or 3/32" mandrels today!
These guides come as a set. A set of guides for either diameter of mandrel consists of 2 guides. One guide for 4 dot placement the other for 6 dot placement. The 4 dot guide can give you spacing for 2 or 4 or 8 dots, the 6 dot guide can give you spacing for 3 or 6 or 12 dot configurations. These tools make placing down a set of evenly spaced dots an absolute breeze!
Take a look at the video demonstration below (Note you will need the free Macromedia Flash 8 player to see this demo. If you don't have that installed please visit
